Neal's Hive control

14 posts / 0 new
Last post
Neal
Neal's Hive control

I put it in a zip file
just open the .html file

Neal
det on load cell

though i try this video

DavidM
Parts

Neal,

Really awesome work... I like the idea of the PVC for the components and sensors

Is your temp sensor a 3D printed part? I like that idea so much more than installing it on a frame. I would be interested in printing these parts, would you share your file?

Image: 

DLM

Mark
Mark's picture
where do you put the sensor?

where do you put the sensor? between the frame?

Mark in Willistown, PA
Hivetool and FlowHive

Neal
about sensors iin hive box

the two sensors are a AM2302, it's a part of the DHT series
And Adafruit #3421, SPH0645 MEMS mic using I2S
They go though a 1.5 inch hole into the hive box, hope the pic in the zip file help

Neal
Dave

i am happy to give you the 3d parts
I use fusion360 so let me know what format .stl or fusion360 ?

Neal
I like to add

The AM2302 is a large sensor. I used it because it is sold by hive tool for both inside and outside temp/hum
I have since learned that the Bosch sensors can be used too. Like the BME280 and BME680.
They are much smaller and would require a much smaller hole in the side of a hive box.
This is a project by itself, and would change the 3d printed part.

DavidM
BOT

Neal

I have a Makerbot so the .stl would be great to test.

MakerBot MakerWare software requires either a .stl or .obj file type in order to print a 3D model.

I haven't looked at the smaller BME series sensors. I just love the idea of #d printed parts mounting in with your approach..... do you have any feedback on the bees covering it with propolis?

DLM

Neal
update

I found that I put .3mf files on thingiverse ,from cura 3.3.1
I will add .stl files too
the sensor been in the hive for 10 days and still working,but have not open the hive yet to see

DavidM
.stl file

Neal...... how can I get the .stl file???

DLM

Neal
DavidM and stl.files

Did you get the .stl files?

DavidM
FIles

Neal I get an error

Page not found
The requested page "/uploads/HTenclosure.zip" could not be found.

I can't seem to download the file from the forum

DLM

Neal
update for htenclosure.zip

I will resend it

Neal
smaller file size

try

Log in to post comments