Metric display of data

7 posts / 0 new
Last post
Paul
Paul's picture
Metric display of data

A test version of the HiveTool graph that supports metric is at:
http://hivetool.org/db/hive_stats5m.pl?units_switch=Metric&hive_id=84

Click on the red Metric/Imperial button left of center on the top bar to switch between Metric and Imperial. Only the graph has been converted (not the table at the bottom).

Please let me know of any errors and failures to graph.

Emil
Emil's picture
Metric

Thank you for this.
I have a couple of questions.
- It don't seem that I get my hive "emil" showing in this graph, it's just spinning around (it was off from 6am to about 12 today, maybe this is the problem)
- Is it possible to use the graph that fills in the missing readings with a line from the latest reading, You see it easily in "norway1" which reads every hour.

Paul
Paul's picture
Metric display and interpolation

The display of metric units is almost finished. The rain and wind speed still need conversion. I assume cm for rain, km/hr for wind and pressure is mb - right? You can test it at
http://hivetool.org/db/hive_stats5m.pl?units_switch=Metric&hive_id=84
There are two new radio buttons located bottom right below the table that switch between metric and imperial and turn on linear interpolation (actually turn off skipping undefined values). Whichever measurement system is selected, it should persist during your session. That choice should probably be saved as a cookie.

Let me know of any changes or data sets that don't graph. I need hive, start date and number of days or whatever settings are needed to replicate the failure. I'm hoping version 5m will become the default. It works at least as good as what is running now. I'm tempted to make metric the default display measurement system as it is probably used by 50% of the viewers/users.

Esa
Esa's picture
excellent! :)

excellent! :)

please use millimeters, mm, for rain, km/h or m/s for wind speed, hPa for air pressure

Below weather underground station here in Finland in my neighbour
https://www.wunderground.com/cgi-bin/findweather/getForecast?query=vesil...

Matthias
Don't want to be a smarty

Don't want to be a smarty pants (?), but it should be "°Celcius" , "Degress Celsius" or "°C on the second Y-Axis, not CelsiOus.

But otherwise: Awesome! It's funny with being growing with a certain set of units. Suddenly all these data make sense to little oldworlders like me! :-)

Paul
Paul's picture
Celcius on the second Y-Axis, not Celsious.

THANKS for pointing that out. It is fixed on the server. I need to fix it on the 0.8 release.

I apologize for taking so long to add metric units on the user interface. Please let me know of any other errors, including conversion errors. I have probably missed a few like the NASA weight filter setting - the Threshold is still lbs/hr when viewing metric.

For those who missed it, we are talking about:
hivetool.org/db/hive_stats5m.pl?hive_id=84&units=Metric

Emil
Emil's picture
Missing 5 last hours

I have seen this before also but it seems that the new link is missing often the last 5 hours
Check out this 2 links:
http://hivetool.org/db/hive_stats5m.pl?hive_id=67&units=Metric&undefined...
http://hivetool.org/db/hive_stats.pl?hive_id=67
BTW my hive just send output every hour from 06.00 to 20.00 + 01.00

Image: 
Log in to post comments