Scale stuck at a time, but still reading new data on config.pl

1 post / 0 new
wwfoste
Scale stuck at a time, but still reading new data on config.pl

My scale stopped updating at 16:15 today. I've tried resetting it, but what I found was it is still reading data changes, but not recording time changes in the database. On the config.Pl page, I can see weight and temperature change, but not time, so it won't log the data. This is on hivetool 0.7.3.

The hive.sh log and hivetool.log are recording the right timestamp and weight/temperature data, but it's not making it to the data section on the pi or the web.

This is what hivetool.log says one time:

Oconee2 2016-06-25 19:05:02
Reading Sensors
Hive weight: 144.123309177
/dev/hidraw1: Could not open device: Read of data from the sensor failed: (null)
Hive temperature: 37.1
Hive humidity: 56.3
Ambient temperature: NULL
Ambient humidity: NULL
Ambient light NULL
Rain NULL

Downloading weather data from KSCWESTM5
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 175 100 175 0 0 4 0 0:00:43 0:00:35 0:00:08 40
Warning: Transient problem: HTTP error Will retry in 1 seconds. 5 retries
Warning: left.

Then the next time, this:

Oconee2 2016-06-25 19:10:02
Reading Sensors
Reading Sensors
Hive weight: 144.182599485
Hive temperature: 37.1
Hive humidity: 56.3
Ambient temperature: NULL
Ambient humidity: NULL
Ambient light NULL
Rain NULL

Downloading weather data from KSCWESTM5
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 175 100 175 0 0 4 0 0:00:43 0:00:35 0:00:08 45
Warning: Transient problem: HTTP error Will retry in 1 seconds. 5 retries
Warning: left.
100 175 100 175 0 0 4 0 0:00:43 0:00:35 0:00:08 43
Warning: Transient problem: HTTP error Will retry in 2 seconds. 4 retries
Warning: left.
0 0 0 0 0 0 0 0 --:--:-- 0:01:16 --:--:--